The Association for Challenge Course Technology requires access prevention to limit your liability. Challenge Course Builders recommend removable hand holds, such as The Flat Face 4. The Flat Face 4 got the name because the aluminum wall plate attaches to the wall flat, thus preventing un-welcomed climbers. The 4 is there because any hand hold can be used 4 different ways. The Flat Face 4 fits snugly into the stationary base for climbing comfort. At the end of your climbing day, the handhold is easily removed by your staff.
Can be used with our hand hold or your choice of hand holds. Easily mounted, NO DRILLING REQUIRED.
By purchasing this item you will receive 1 wall plate, 1 hand hold mount, and 6 - 2 5/8 or 2 1/2 deckboard screws.
**No hand hold is included with this item.
Posted by Lindsey on 24th Aug 2015
The equipment itself is sturdy and well put together. My complaint is, the flat head cap screws that were sent are really long and will either need to sawed off or we need to buy shorter ones. We also have to figure out how to drill out a large hole on our hand holds for the flat head screws because right now the hole we have is just large enough to fit the screw and the bolt but not large enough to fit a wrench to screw down the bolt all of the way. Anyways, those are just a few problems we ran into. Otherwise the product is great.
Posted by Unknown on 19th May 2014
We just installed these on our wall at camp. The plates install to the wall very easily. The are a little difficult to attach to the holds as we used our own. The bolts they gave were not always the right length. Also the angle on the bolt bottomed out on the whole in the hold before it got tight on the plate. It took some messing around with them to get it right. All in all we are very pleased with the installation process. We will see after the end of the summer.